Digikeijs DR4024-Box Complete set - 1x servo decoder, 4x mini servo and 4x 50cm extension cable
- Availability: 2
- Brands Digikeijs
- Product Code: DR4024-BOX
- Product viewed: 430
Complete set including 1x servo decoder, 4x mini servo and 4x 50cm extension cable Complete set inclusief 1x DR4024 servodecoder, 4x DR60030 mini servo en 4x DR60035 verlengkabel 50cm The DIGISERVO decoder is a fully programmable servo decoder. Each output also has an extra switching output to switch eg a light or decoupling track. Every output can also be calibrated with software which makes fitting servos a lot easier because they are set up after installation. The DIGISERVO decoder is the first servo decoder to work on the basis of function mapping. The decoder sees the äóÖswitching addressesäó» as control functions for the various outputs. Depending on the mapping that has been set up, the decoder can use from 1 to 8 äóÖswitching addressesäó». Features 4 servo outputs 4 switching outputs Power indicator Activity indicator Mass simulation (eg semaphores) Servo calibration via the control unit Detailed mapping function Multiprotocol (DCC/MM) Fully CS2-compatible POM (Programming on Main) Separate power and signal input Technical features Power consumption: 15mA Maximum servo load: 500mA per servo output (2 Amps total) Maximum switching load: 1 Amp per output (3 Amps total)
Please note with this kit you will need some fine wire to connect the servos arms to said point or signal arm.